Dragonfly update v12.09 still locking on downrigger

[Jim_MI]

Chuck -
I guess that is what was happening since my screen dump shows the bottom at 190+ ft and the depth is displayed as 30 ft. As I say, the issue self-corrected at some point while I was fiddling with various settings, so I don't recall if the zoom function worked or not. This was a major problem with the older firmware - if the downrigger was interpreted as the bottom, then manually setting a depth only worked if you did not use zoom, since zooming only looked at the water column above the downrigger regardless of what depth was manually set. Do you know if the 12.09 lets you manually zoom above the depth you manually set, or does it also default to a zoom window above what it thinks is the depth (ie - close-up of the water column above the downrigger).
Jim