The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / Connecting a DSM300 to a68 MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting a DSM300 to a68 MFD
05-10-17, 10:29 AM
Post: #1
TheLungMD Offline
Junior Member
**
 		Posts: 1
Joined: Jan 2017
Reputation: 0
Connecting a DSM300 to a68 MFD
Is it possible to connect a DSM300 to the a68? If so, which cable do I need? If possible, I am assuming I would use the 10 pin "network" port on the a68, but not sure if the HSB2 or ethernet port on the DSM300 would be used.

My goal is to get a 1kw Airmar TM260 50/2000 kHz transducer (powered to 1kw by DSM300) to display on the a68. If the DSM300 would NOT work, is there another black box sounder that would?

Thanks again for any help, Kyle
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Connecting a DSM300 to a68 MFD - TheLungMD - 05-10-17 10:29 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication