The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / Axiom MFDs are not compatible with the DSM300 and DSM30

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom MFDs are not compatible with the DSM300 and DSM30
05-10-17, 03:10 PM
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Axiom MFDs are not compatible with the DSM300 and DSM30
Axiom MFDs are not compatible with the DSM300 and DSM30

Axiom MFDs are not compatible with the DSM300 and DSM30 50kHz/200kHz Digital Sonar Modules. Accordingly, it would be recommended that the transducers which have been interfaced to these DSMs be disconnected from the DSM and that they be adapted for use with the Axiom DV or Axiom RV MFD. Alternatively, the DSM30 or DSM300 may be replaced with a CP370 ClearPulse Sonar Module Transducers which have been designed for use with a DSM30 or DSM300 are also compatible with the CP370.


CRAFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Axiom MFDs are not compatible with the DSM300 and DSM30 - Chuck - Raymarine - Moderator - 05-10-17 03:10 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication