Raymarine forum / Raymarine Forums / Fishfinders v / Transducer RV 220 pair

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transducer RV 220 pair
05-11-17, 08:03 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Transducer RV 220 pair
ReelAttitudeBDA,

Should one of the a98 MFD's Ethernet Network ports not currently be in use, then one of these ports may be interfaced to the Ethernet Network port of the Axiom RV MFD via an appropriate length of RayNet (F) to RayNet (F) Cable. Should both of the a98 MFD's Ethernet Network ports currently be in use, then one or both of the Ethernet cables will be disconnected from the a98 MFD's Ethernet Network ports and will instead be connected to the Ethernet Network port of a HS5 RayNet Network Switch. An Ethernet port of the a98 MFD and an Ethernet port of the Axiom RV MFD will then each be connected to the HS5 RayNet Network Switch via appropriate lengths of RayNet (F) to RayNet (F) Cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Transducer RV 220 pair - Chuck - Raymarine - Moderator - 05-11-17 08:03 AM
RE: Transducer RV 220 pair - Ronnie - 08-31-17, 04:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication