Raymarine forum / Raymarine Forums / Autopilots v / Interfaceing EV 200 to older Raymarine Displays/ GPS

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interfaceing EV 200 to older Raymarine Displays/ GPS
05-15-17, 08:45 AM
Post: #12
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Interfaceing EV 200 to older Raymarine Displays/ GPS
Walt,

Q: Can I just use the pilot as is? I'm guessing it received speed info long enough to do the auto learn requirement for a properly operating pilot. Would that be correct?
A: As you have suggested, the Evolution autopilots are heavily dependent on being provided either speed through water data or GPS speed over ground data from the system. Should the autopilot fail to perform in a satisfactory manner in Auto mode in the future, then you will need to troubleshoot the failure reported with the SeaTalk to SeaTalkng Converter (recommend created a separate thread to address this topic).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Interfaceing EV 200 to older Raymarine Displays/ GPS - Chuck - Raymarine - Moderator - 05-15-17 08:45 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication