Raymarine forum / Raymarine Forums / Multifunction Displays v / AIS Connection Lost | C90W | IC-M506 | NMEA-2000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS Connection Lost | C90W | IC-M506 | NMEA-2000
05-15-17, 09:01 AM (This post was last modified: 05-15-17 09:03 AM by Chuck - Raymarine - Moderator.)
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: AIS Connection Lost | C90W | IC-M506 | NMEA-2000
Welcome to the Raymarine Forum Gregg,

Please click here to view a FAQ addressing this subject. The items within the referenced FAQ addressing NMEA 0183 networking may be skipped. Unlike the MFD designs which followed the C-Series Widescreen MFDs, the SeaTalkng diagnostics of the C-Series Widescreen MFDs is quite limited. Should the other items listed within the FAQ be satisfied and should these products be interfaced to one another via a powered and properly terminated SeaTalkng / NMEA 2000 backbone, then it would be necessary to interface a NMEA 2000 network analyzer (ex. Actisense NGT-1-USB w/NMEA Reader software, etc.) to determine whether the AIS data is present on the backbone. If so, then it may indicated a fault with the MFD's SeaTalkng communications interface.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: AIS Connection Lost | C90W | IC-M506 | NMEA-2000 - Chuck - Raymarine - Moderator - 05-15-17 09:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication