Raymarine forum / Raymarine Forums / Autopilots v / Interfaceing EV 200 to older Raymarine Displays/ GPS

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interfaceing EV 200 to older Raymarine Displays/ GPS
05-16-17, 08:22 AM (This post was last modified: 05-16-17 08:23 AM by Chuck - Raymarine - Moderator.)
Post: #14
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Interfaceing EV 200 to older Raymarine Displays/ GPS
Walt,

The following except from Section 6.2 Troubleshooting of the SeaTalk to SeaTalkng Installation Instructions describes all of the codes indicated by the SeaTalk to SeaTalkng Converter.

[Image: attachment.php?aid=983]

As indicated with the excerpt, a solidly illuminated green LED indicates a healthy converter which is indicating that it is not connected to a source of SeaTalk data.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Interfaceing EV 200 to older Raymarine Displays/ GPS - Chuck - Raymarine - Moderator - 05-16-17 08:22 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication