HS5 + NMEA2K +
|
05-16-17, 10:28 PM
(This post was last modified: 05-17-17 08:13 AM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
RE: HS5 + NMEA2K +
OK...Now I am a bit confused. Only because everyone uses terms like SeatalkNG and NMEA2K interchangeably. And while the "data" is interchangeable for the most part, the connections are not.
1. Why would I not connect the RS150 GPS receiver to the HS5 switch? If I don't, it will require an adapter to connect it to the existing NMEA2K backbone since it is Raymarine SeatalkNG connectors at both ends. In the diagrams for the HS5 it appears to show the GPS receiver connected to the switch as well. 2. Did you mean to infer that I need a Separate Raymarine SeaTalkNG Backbone in addition to my existing NMEA2K Backbone? 3. Does the HS5 require a SeatalkNG Backbone in addition to the "powered" switch? |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
HS5 + NMEA2K + - Randar - 05-14-17, 09:16 AM
RE: HS5 + NMEA2K + - Chuck - Raymarine - Moderator - 05-15-17, 03:27 PM
RE: HS5 + NMEA2K + - Randar - 05-15-17, 05:07 PM
RE: HS5 + NMEA2K + - Chuck - Raymarine - Moderator - 05-16-17, 10:33 AM
RE: HS5 + NMEA2K + - Randar - 05-16-17 10:28 PM
RE: HS5 + NMEA2K + - Chuck - Raymarine - Moderator - 05-17-17, 08:26 AM
RE: HS5 + NMEA2K + - Randar - 05-18-17, 05:16 AM
RE: HS5 + NMEA2K + - Chuck - Raymarine - Moderator - 05-18-17, 07:58 AM
RE: HS5 + NMEA2K + - Randar - 05-18-17, 10:09 AM
RE: HS5 + NMEA2K + - Chuck - Raymarine - Moderator - 05-18-17, 10:22 AM
|
User(s) browsing this thread: 1 Guest(s)