Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dragonfly 4 Pro w/ update 12.09 not working properly
03-28-16, 03:44 PM (This post was last modified: 03-28-16 03:45 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Dragonfly 4 Pro w/ update 12.09 not working properly
Welcome to the Raymarine Forum Stephen,

Please note that we have not received any similar comments since introducing the v12.09 software.

Q1) Depth only works around 10mph and below, if I go above that, the screen goes blue and shows 1200'. Sonar does the same thing, works till about 10mph and then goes white.

A1) Please click here to view a FAQ addressing this subject.

Q2) GPS seems to take alot longer to get my position now.

A2) Please verify that the Dragonfly display has been installed in a location affording it to have an unobstructed view of the skies overhead. If so, and the display takes longer than a few minutes to acquire a GPS position FIX, and the boat has not been moved a significant distance from the location where the display was last used (the latter would constitute a potential cold GPS start) then it is recommended that the display be sent to Raymarine’s Product Repair Center to be bench tested/serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Dragonfly 4 Pro w/ update 12.09 not working properly - Chuck - Raymarine - Moderator - 03-28-16 03:44 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)