Raymarine forum / Raymarine Forums / Multifunction Displays v / AIS Connection Lost | C90W | IC-M506 | NMEA-2000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS Connection Lost | C90W | IC-M506 | NMEA-2000
05-21-17, 03:55 PM
Post: #12
[email protected] Offline
Junior Member
**
 		Posts: 4
Joined: May 2016
Reputation: 0
RE: AIS Connection Lost | C90W | IC-M506 | NMEA-2000
I have the follow on Raymarine NMEA 2000 cabling ( no Seatalk ng to NMEA converter). I have read the thread, checked the FAQs and cannot find an issue.
My MNEA 2000 network:
-C90W – not able to receive from the Icom – firmware is latest patch V 2.35
-Icom M506 – receiving long/lat and speed without issue
-Actisense 0183 to NMEA converter -nothing is attached to it
Raymarine NMEA power connection
All connections are Ts
In addition I have ST60 wind, depth, and speed gauges I want to get into NMEA 2000 via cable A06047.

Q1: how should C90W be configured to receive NMEA 2000?
Q2: do I need to add a Seatalk ng to NMEA 2000 converter for either the ST60 and/or C90W?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: AIS Connection Lost | C90W | IC-M506 | NMEA-2000 - [email protected] - 05-21-17 03:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication