Raymarine forum / Raymarine Forums / Multifunction Displays v / AIS Connection Lost | C90W | IC-M506 | NMEA-2000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS Connection Lost | C90W | IC-M506 | NMEA-2000
05-22-17, 07:37 PM (This post was last modified: 05-23-17 01:14 PM by Chuck - Raymarine - Moderator.)
Post: #14
[email protected] Offline
Junior Member
**
 		Posts: 4
Joined: May 2016
Reputation: 0
RE: AIS Connection Lost | C90W | IC-M506 | NMEA-2000
I am planning on buying E22158 SeaTalk one to SeaTalkng converter and hooking the NMEA 2000 spur cable from the Icom to the a blue connection. The ST60 will be on the yellow connection using the Seatalk1 to NMEA conversion cable. The C90W will be connected on the white connector with a terminator on the other blue. I will load the converter software on the C90W. Does this sound correct?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: AIS Connection Lost | C90W | IC-M506 | NMEA-2000 - [email protected] - 05-22-17 07:37 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication