S100 No Pilot

[Chuck - Raymarine - Moderator]

Tom,

To address the issue of updating the SeaTalk to SeaTalkng Converter's software, it is recommended that you verify that the MFD has been updated with the latest available Raymarine product software update. If so, then verify that the file titled ray_Adapters_20160913.upgrade.iso has been copied to the root level directory of the microSD memory card. After doing so, insert the microSD memory card into the MFD's memory card reader and then command the MFD to Check Card For Updates. Should no updates be found, then the MFD's memory card reader should be tested to ensure that it is operational. If found to be operational, then it is recommended that all spurs be disconnected from the SeaTalkng backbone other than the MFD and the SeaTalkng Power Cable and that the update then be attempted again. Should you still be unable to update the SeaTalk to SeaTalkng Converter's software, then please click here to view a FAQ addressing alternative resources to update component software.

Please click here to view a FAQ addressing devices which may block Data Source Selection.

Should you have addressed the items specified above and should the problem persist with the S100, then it would be recommended that the base station and S100 be sent to Raymarine’s Product Repair Center to be bench checked / serviced.