Upgrades to Existing Raymarine System on B35.5

[Tnauck]

Thanks for the recommendation on the addition of the E70196 VHF NMEA 0183 to SeaTalkng Converter Kit. I plan to install it as shown on the attached diagram. Essentially what I plan to do is extend my existing SeaTalkng network with another backbone cable to accomodate the converter, connect the VHF converter cable in position three, leaving positions two and four blank and terminating at position five. I'll switch the Power and i50 Depth connections on the original 5 point connector strip to balance the additional power load of the converter strip. Please review and comment. Thanks for your help.