E95 Date Wrong

[Chuck - Raymarine - Moderator]

Dennis,

Upon examination of your diagram, a problem has been identified with the installation which may result in a ground loop. The connection between the ST60 Depth and Power should be removed. The ST60 Instruments will receive data from the SeaTalkng backbone via the SeaTalk to SeaTalkng Converter. Should the problem persist after having disconnected the specified cable from the ST60 Depth Instrument and then switching power OFF and then ON again to the system, then please respond with the Diagnostics...html file from the system. Your diagram is also not quite complete in that it does not show how the autopilot components and termination at the autopilot end of the backbone has been installed. Please additionally specify whether the MFD which has been designated via the Data Sources (HOME->SET-UP->SYSTEM SETTINGS->DATA SOURCES) feature to be the system's source of GPS data has been installed in a location affording it an unobstructed view of the skies overhead.