The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Is there Really an Issue with Mounting Axiom 9 within 1 M of Compass?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Is there Really an Issue with Mounting Axiom 9 within 1 M of Compass?
06-08-17, 11:03 AM
Post: #1
Dan_Y Offline
Member
***
 		Posts: 70
Joined: Mar 2016
Reputation: 0
Is there Really an Issue with Mounting Axiom 9 within 1 M of Compass?
The Axiom 9 (E70366) installation sheet (Doc no. 88070-1, 2/17) shows to mount the MFD greater than 1 meter from a binnacle compass. That is essentially impossible on all but the largest sailboats if the MFD is used as the main chart plotter at the helm.

The setup will be as shown in the attached photo with the Axiom 9 replacing the C80 Classic directly above the binnacle compass (0.3 m) away. What issues can I expect? A Mu metal lining in the mounting case is all I can think of at the moment.
Thank You
Dan
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Is there Really an Issue with Mounting Axiom 9 within 1 M of Compass? - Dan_Y - 06-08-17 11:03 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication