The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / CP370 interfaced to C/E-Series Widescreen MFD: no imaging plotted, no depth

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CP370 interfaced to C/E-Series Widescreen MFD: no imaging plotted, no depth
01-14-16, 03:57 PM (This post was last modified: 01-12-17 11:50 AM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
CP370 interfaced to C/E-Series Widescreen MFD: no imaging plotted, no depth
CP370 interfaced to C/E-Series Widescreen MFD: no imaging plotted, no depth

CP370 interfaced to C/E-Series Widescreen MFD: no imaging plotted, no depth
Should a CP370 be interfaced to a C/E-Series Widescreen MFD, no fishfinder imaging will be plotted and no depth will be reported from the CP370 until the MFD's Fishfinder application settings have be configured to specify the model of transducer which has been interfaced to the CP370. Each Raymarine Fishfinder transducer features a tag affixed to the plug end of the transducer's cable. The command sequence to select the transducer is MENU->FISHFINDER SETUP->TRANSDUCER SETTINGS->SELECT TRANSDUCER.

RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
CP370 interfaced to C/E-Series Widescreen MFD: no imaging plotted, no depth - Chuck - Raymarine - Moderator - 01-14-16 03:57 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication