CP370/B164 issue

[eric1528]

Once the machine was reset it default it auto for most settings so it saw the transducer and you can see that the frequency was set on auto. I have had issues with the autopilot also and the response was to make sure all the wires were run separate and no interference with the compass sensor. Now I have to make sure no wires are run with the transducer, with most boats there are some space constraints and it is hard to have everything separated. I will see if I can move some stuff around again, the static issue is a new issue, the depth has been a issue since install. What can be done with the depth issue while I work on the static issue?