Raymarine forum / Raymarine Forums / Fishfinders v / DSM 300 Issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSM 300 Issues
06-19-17, 08:40 PM
Post: #9
seeray96 Offline
Junior Member
**
 		Posts: 46
Joined: Jun 2016
Reputation: 0
RE: DSM 300 Issues
I set the MFD screen so that it was 50% fishfinder, but no messages appeared.

If I switch to the AXIOM, will I still need the DSM300? From what I see on the Internet, the 300 is not a good long-term bet. Also, will I still be able to use the Airmar B60-200-RAY xducer? As I mentioned earlier, I do not use my boat for fishing.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
DSM 300 Issues - seeray96 - 06-06-17, 01:11 PM
RE: DSM 300 Issues - seeray96 - 06-13-17, 02:51 PM
RE: DSM 300 Issues - seeray96 - 06-14-17, 10:02 AM
RE: DSM 300 Issues - seeray96 - 06-15-17, 08:46 PM
RE: DSM 300 Issues - seeray96 - 06-19-17 08:40 PM
RE: DSM 300 Issues - seeray96 - 06-20-17, 09:47 AM
RE: DSM 300 Issues - seeray96 - 06-20-17, 12:08 PM
RE: DSM 300 Issues - seeray96 - 06-27-17, 01:54 PM
RE: DSM 300 Issues - seeray96 - 06-28-17, 12:03 PM
RE: DSM 300 Issues - seeray96 - 06-29-17, 12:50 PM
RE: DSM 300 Issues - seeray96 - 06-29-17, 03:12 PM

Forum Jump:


User(s) browsing this thread: 8 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication