Raymarine forum / Raymarine Forums / Multifunction Displays v / Is the E70013 Compatible the w/eS78 in anyway?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Is the E70013 Compatible the w/eS78 in anyway?
06-22-17, 09:29 AM (This post was last modified: 06-22-17 09:31 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Is the E70013 Compatible the w/eS78 in anyway?
Welcome to the Raymrine Forum TheOiler,

Q1. Regarding the E70013 (c125 MFD) and eS78. Are these two compatible in anyway?.

A1. Yes. These MFDs are designed be be interfaced to one another via Ethernet communications to support sharing of all features and resources (except for NTSC/PAL video and Thermal Camera). Should the eS78 MFD have an unused Ethernet NETWORK socket, then these two MFDs would simply be interfaced to one another via an appropriate length of RayNet (F) to RayNet (F) Cable. If not, then it would be necessary to install a HS5 RayNet Network Switch to which each MFD and the other compatible devices having an Ethernet communications port each be connected.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Is the E70013 Compatible the w/eS78 in anyway? - Chuck - Raymarine - Moderator - 06-22-17 09:29 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication