[CA] Transducer Problem?

[Chuck - Raymarine - Moderator]

Joe,

Please click here to view a FAQ addressing this subject. Unfortunately, while most power driven hulls are quite satisfactory for transom mounted transducers, those having hull features which can cause aeration such as shown within the referenced FAQ (ex. the anti-porpoising angle stock welded to the bottom of the hull), can pose a challenge or impossible conditions for transducers mounted aft of such features or thru-hulls. You may want to consider installing a transducer mounting plate to the hull in the area between the inboard edge of the anti-porpoising angle stock and the inboard strake. The transducer may then be mounted half way between these two hull features.