The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / EV-150 - Voltage - Pump Supply

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV-150 - Voltage - Pump Supply
06-27-17, 11:36 AM (This post was last modified: 06-27-17 02:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Striper 2901
**
 		Posts: 16
Joined: May 2016
Reputation: 1
EV-150 - Voltage - Pump Supply
I purchased the #V-150 and the Type 1 Pump. I am having an issue with the pump not engaging 100%. When I switch the autopilot to Auto - you can hear the pump work to actuate but it doesn't engage. I look at the voltage and I am at 13.8V at the ES128 MFD. It seems like the voltage being supplied to the pump is not sufficient. What additional information do you need to help with a resolution. thank you!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
EV-150 - Voltage - Pump Supply - [email protected] - 06-27-17 11:36 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication