Raymarine forum / Raymarine Forums / Multifunction Displays v / ST60 Depth Issue

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST60 Depth Issue
06-27-17, 02:11 PM
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: ST60 Depth Issue
Neil,

Unfortunately, the resolution of your photo was too low be magnified without blurring the image. That said, one would have to trace the SeaTalk cables exiting the course computer's SeaTalk terminals to know what they had been connected to. Should you be able to do so, then simply disconnect the red lead of the SeaTalk cable connecting the MFD's SeaTalk port to the autopilot course computer's red SeaTalk terminal.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST60 Depth Issue - NeilB - 06-25-17, 04:28 PM
RE: ST60 Depth Issue - NeilB - 06-27-17, 08:20 AM
RE: ST60 Depth Issue - NeilB - 06-27-17, 10:12 AM
RE: ST60 Depth Issue - NeilB - 06-27-17, 12:26 PM
RE: ST60 Depth Issue - Chuck - Raymarine - Moderator - 06-27-17 02:11 PM
RE: ST60 Depth Issue - NeilB - 06-27-17, 03:13 PM
RE: ST60 Depth Issue - NeilB - 06-27-17, 07:30 PM
RE: ST60 Depth Issue - NeilB - 07-14-17, 04:43 PM
RE: ST60 Depth Issue - NeilB - 07-17-17, 07:54 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication