ST60 Depth Issue

[Chuck - Raymarine - Moderator]

Neil,

While not common, is certainly possible and acceptable to insert the leads from more than one SeaTalk Cable into the set of terminals of one of the autopilot course computer's SeaTalk ports. Unless the installer had labeled each of the SeaTalk cables, there would be no way to identify what devices these cables had been connected to. Per my prior response, one would have to trace the SeaTalk cables exiting the course computer's SeaTalk terminals to determine what they had been connected to. Should you be able to do so, then simply disconnect the red lead of the SeaTalk cable connecting the MFD's SeaTalk port to the autopilot course computer's red SeaTalk terminal.