Raymarine forum / Raymarine Forums / Multifunction Displays v / ST60 Depth Issue

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST60 Depth Issue
06-28-17, 09:19 AM
Post: #12
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: ST60 Depth Issue
Neil,

As indicated, I do not suspect that the issue has anything to do with the addition of the C120. However, it is possible that the circuitry of the ST60 Depth Instrument or transducer may be warming up over the period of time specified ... and then may be failing. Again, it is recommended that the ST60 Depth Instrument be tested with another transducer to fault isolate the problem. The cost of an instrument depth transducer will likely be less than the cost of the technician's services.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST60 Depth Issue - NeilB - 06-25-17, 04:28 PM
RE: ST60 Depth Issue - NeilB - 06-27-17, 08:20 AM
RE: ST60 Depth Issue - NeilB - 06-27-17, 10:12 AM
RE: ST60 Depth Issue - NeilB - 06-27-17, 12:26 PM
RE: ST60 Depth Issue - NeilB - 06-27-17, 03:13 PM
RE: ST60 Depth Issue - NeilB - 06-27-17, 07:30 PM
RE: ST60 Depth Issue - Chuck - Raymarine - Moderator - 06-28-17 09:19 AM
RE: ST60 Depth Issue - NeilB - 07-14-17, 04:43 PM
RE: ST60 Depth Issue - NeilB - 07-17-17, 07:54 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication