Raymarine forum / Raymarine Forums / Fishfinders v / chirp with high, medium and low

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
chirp with high, medium and low
03-31-16, 08:34 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: chirp with high, medium and low
Welcome to the Raymarine Forum str8fishon,

Please note that the fishfinder transducer socket of the ax8 MFDs, eSx8 MFDs, and CP100 CHIRP/DownVision Sounder Module are exclusively designed to be interfaced to the transducers found here. In order to LM and MH CHIRP transducers, the a/c/e/eS/gS-Series MFDs (any model of these MFDs will support CHIRP fishfinder features when properly accessorized) would need to be interfaced to a CP470 or CP570 CHIRP Sounder Module and one or a pair of compatible CHIRP transducers. These transducers are designed to be directly plugged into a CP470's and C570's transducer sockets.

Please click here to view a FAQ addressing use of third party MFDs with Raymarine fishfinding products.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: chirp with high, medium and low - Chuck - Raymarine - Moderator - 03-31-16 08:34 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication