Connecting a DSM300 to a68 MFD

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Connecting a DSM300 to a68 MFD

07-03-17, 10:53 AM

Post: #6

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: Connecting a DSM300 to a68 MFD

Rob,

Q. The transducer is 600 watt but it worked fine hooked up to the dsm300 so I am hoping the same will be true for the cp370.
A. Indeed it should. The advantage of the CP370 is that it will support use with a 1kW transducer should you ever desire to interface a high performance 1kW transducer to the system.

« Next Oldest | Next Newest »

Messages In This Thread

Connecting a DSM300 to a68 MFD - TheLungMD - 05-10-17, 10:29 AM

RE: Connecting a DSM300 to a68 MFD - Chuck - Raymarine - Moderator - 05-10-17, 10:47 AM

RE: Connecting a DSM300 to a68 MFD - RobATX - 06-30-17, 10:05 PM

RE: Connecting a DSM300 to a68 MFD - Chuck - Raymarine - Moderator - 07-03-17, 09:30 AM

RE: Connecting a DSM300 to a68 MFD - RobATX - 07-03-17, 09:40 AM

RE: Connecting a DSM300 to a68 MFD - Chuck - Raymarine - Moderator - 07-03-17 10:53 AM

RE: Connecting a DSM300 to a68 MFD - RobATX - 07-03-17, 11:00 AM

RE: Connecting a DSM300 to a68 MFD - Chuck - Raymarine - Moderator - 07-03-17, 11:01 AM

User(s) browsing this thread: 2 Guest(s)