Odd ST60+ wind issue Thread Missing

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Ken,

Unfortunately, the thread was accidentally deleted earlier this morning. Please click here to view a FAQ addressing how to test the ST50/ST60 (cylindical body) masthead wind transducer.
Should the vane lead not be outputting the maximum voltage when the vane is pointing to starboard, then it would be recommended that the vane be remove from the transducer, the vane shaft should then be rotated until maximum vane voltage is observed with a meter, that the vane be oriented to starboard, and that the vane then be pressed back onto the vane shaft. After doing so, it would be recommended that the instrument be reset and then re-calibrated (to include alignment). Should the problem persist, then please respond accordingly.