The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / Can the SeaTalk to SeaTalkng Converter with an autopilot?

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can the SeaTalk to SeaTalkng Converter with an autopilot?
01-15-16, 09:09 AM (This post was last modified: 01-12-17 11:20 AM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Can the SeaTalk to SeaTalkng Converter with an autopilot?
Can the SeaTalk to SeaTalkng Converter with an autopilot?

Unfortunately, the SeaTalk to SeaTalkng Converter's installation guide has not been updated since the kit was introduced. With the introduction of v1.14 SeaTalk to SeaTalkng Converter software, the SeaTalk to SeaTalkng Converter now supports integration with autopilots. The SeaTalk to SeaTalkng Converter's product web page and SeaTalk to SeaTalkng Converter software update web page have each been updated to reflect this change in product compatibility. The software for the Converter has been updated a few times since v1.14. Correspondingly, it is recommended that like all Raymarine products, the SeaTalk to SeaTalkng Converter be updated with the latest available software. It is expected that Raymarine will be updating the online version of Owner’s Manual to reflect this change.

RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Can the SeaTalk to SeaTalkng Converter with an autopilot? - Chuck - Raymarine - Moderator - 01-15-16 09:09 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication