I60 wind not displaying A/T wind speed

[David Smith]

I replaced VDO wind instruments and installed a new I60 wind and close hauled package to my old Raymarine autopilot and Tridata using the cables supplied. The wind speed does not display, however after calibration the true wind speed shows as the boat speed when the boat is moving, but the apparent wind still shows --. The apparent and true wind angles show the correct angles. At the dock both the T/A speed indicator shows --. The I60 is connected to the Tridata via an old/new connector and the Tridata is connected to the ST4000+ using the original old connector. Power is supplied to the ST4000+. The voltage readings on the I60 wind seem to be within the specs. When first connected I believe the wind speed did show momentarily but I have done a factory reset with no improvement.