The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / Trouble with X30 computer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Trouble with X30 computer
07-16-17, 09:34 PM
Post: #1
Pcbeachbroker Offline
Junior Member
**
 		Posts: 2
Joined: Dec 2016
Reputation: 0
Trouble with X30 computer
My St8001 has recently begun giving error codes "current limit" and "mot stall".
I removed the type1 liner drive and tested with seperate power source. Works in both directions. When I power the x30 on I have 13.26 v at power terminals. When I enable auto function I get 13.26v at the clutch terminals but no voltage at the drive motor terminals. With the drive disconnected results are identical but the st8001 still alarms the " current limit" or "mot stall". Any other troubleshooting recommended?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Trouble with X30 computer - Pcbeachbroker - 07-16-17 09:34 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication