Ray60 not getting position data

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Dave,

The wire connection and MFD NMEA 0183 port setting are indeed correct. It is recommended that you verify that the MFD is reporting that it is receiving a GPS position FIX and that the MFD's NMEA 0183 Output has been configured to transmit all listed NMEA 0183 sentences. Should this fail to address the problem, then it would be recommended that a wraparound test of the MFD's NMEA 0183 port be performed. Should the MFD's NMEA 0183 port indicate that sentences are being received, then the MFD's NMEA 0183 communications interface would be deemed operational and the VHF radio should be replaced or sent to Raymarine’s Product Repair Center to be bench checked / serviced. The wraparound test procedure for A/C/E-Series Classic MFDs is similar to the wraparound test for a/c/e/eS/gS-Series MFDs operating with LightHouse II software.