Raymarine forum / Raymarine Forums / AIS v / AIS hookup to e95 - Standard Horizon Matrix GX2200 - Wire help

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS hookup to e95 - Standard Horizon Matrix GX2200 - Wire help
07-20-17, 01:46 PM (This post was last modified: 07-20-17 02:34 PM by Chuck - Raymarine - Moderator.)
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: AIS hookup to e95 - Standard Horizon Matrix GX2200 - Wire help
Rdubs,

Unfortunately, it would not be possible to perform an end to end test unless the system's AIS receiver is receiving AIS communications from other vessels. As indicated, a wraparound test may be used to determine the operational state of the MFD's NMEA 0183 port.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: AIS hookup to e95 - Standard Horizon Matrix GX2200 - Wire help - Chuck - Raymarine - Moderator - 07-20-17 01:46 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication