change to E80 from C120

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

change to E80 from C120

07-21-17, 10:46 AM

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: change to E80 from C120

Welcome to the Raymarine Forum Don,

It sounds as though the RS125 may have suffered a failure of its SeaTalk communications circuitry. You may want to try interfacing it via NMEA 0183 to the MFD's NMEA 0183 Cable. Regarding the autopilot, have you configured the MFD's Autopilot Controls feature to ON?

« Next Oldest | Next Newest »

Messages In This Thread

change to E80 from C120 - Don Guy - 07-21-17, 10:24 AM

RE: change to E80 from C120 - Chuck - Raymarine - Moderator - 07-21-17 10:46 AM

RE: change to E80 from C120 - Don Guy - 07-21-17, 12:31 PM

RE: change to E80 from C120 - Don Guy - 07-21-17, 12:53 PM

RE: change to E80 from C120 - Chuck - Raymarine - Moderator - 07-24-17, 08:26 AM

RE: change to E80 from C120 - Don Guy - 07-25-17, 09:07 AM

RE: change to E80 from C120 - Chuck - Raymarine - Moderator - 07-25-17, 12:52 PM

RE: change to E80 from C120 - Don Guy - 07-27-17, 10:48 AM

RE: change to E80 from C120 - Chuck - Raymarine - Moderator - 07-27-17, 10:57 AM

RE: change to E80 from C120 - Don Guy - 07-27-17, 11:14 AM

RE: change to E80 from C120 - Chuck - Raymarine - Moderator - 07-27-17, 11:55 AM

User(s) browsing this thread: 3 Guest(s)