E120 Classic and Network Update to STng

[kevinvh]

Thanks for the phone call and advice today Chuck - really great advice.

I have modified my proposed network diagram to reflect what we discussed. Can you confirm that the diagram is correct this time. I have all the components.

As I mentioned, the E120 Classic s/w version is V5.69 and the ST1-STng Converter s/w version is V2.03.

Await your simulation on Monday to see if you can engage the autopilot from the E120 Classic when a GoTo Route or Waypoint is selected. I was not able to do it previously with just the E120-STng cable connected to the MFD - the GoTo tab appeared on the MFD but there was no 'Engage Pilot' tab under it. I had to connect the ST1 network to the MFD as well via a E120-ST1 cable to get the 'Engage Pilot' tab to appear.

Thanks - Kevin