EV-1 Linearization Problems

[Holts]

(04-01-16 10:56 AM)Steve - Raymarine - Moderator Wrote:  Please provide a system diagram (hand written will work) of the system and how you are connecting the two backbones, Seatalk NG and NMEA 2000 together. If they are not communicating, the issue is most likely due to incorrect wiring, and backbone construction.

Steve, this subject was discussed by phone not on this forum. The cables I was told to purchase was the Raymarine back bone cable seatalk AO6034 and connect it to a Garmin NEMA 2000 backbone cable matching color for color. After doing this I was to connect the Garmin side to the existing NEMA 2000 and the Raymarine side to the blue 5 gane seatalk and disconnecting the power cable off the white end of the seatalk so not to have two powers at once since the Garmin was providing the power now. When doing this I loose satellites completely on the Garmin and no numbers on the autopilot. I'm hoping for an easy answer. Thanks Mark