Raymarine forum / Raymarine Forums / Autopilots v / Autopilot tacking

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Autopilot tacking
07-28-17, 07:16 AM (This post was last modified: 07-28-17 10:18 AM by Chuck - Raymarine - Moderator.)
Post: #7
daknecht Offline
Junior Member
**
 		Posts: 46
Joined: Mar 2016
Reputation: 0
RE: Autopilot tacking
Attached is the diagnostics file. I decided to attempt a Factor Reset and redo the calibration after saving this file. I did the reset and the dockside calibration. My manual says that I would then go to Seatrial calibration but there was no menu option for this so I am unsure how to proceed. Thanks- Dave


Attached File(s)
.html  Diagnostic_Data_0001_All_Devices_11-45-36_07-27-2017.html (Size: 14.6 KB / Downloads: 1629)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Autopilot tacking - daknecht - 07-06-17, 11:45 AM
RE: Autopilot tacking - daknecht - 07-10-17, 06:09 AM
RE: Autopilot tacking - daknecht - 07-17-17, 03:44 PM
RE: Autopilot tacking - daknecht - 07-28-17 07:16 AM
RE: Autopilot tacking - daknecht - 08-04-17, 08:11 AM
RE: Autopilot tacking - daknecht - 08-13-17, 04:16 PM
RE: Autopilot tacking - daknecht - 08-14-17, 09:38 PM
RE: Autopilot tacking - daknecht - 08-17-17, 08:17 AM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication