cam220Ip in accessible

[Oregoncme]

I wanted to give an update to anyone that may have the same problem as I had. The program that identified the up address worked perfectly. The problem that would not allow my Thinkpad to "see" the cam ip220, was that I had the Internet Explorer's Firewall not set to OFF. The minute I went into I.E. settings and then Firewall, setting that to OFF, all was well with the 192.168.1.100 went thru.

Unfortunately, however, there is no adjustment for TINT. So, seeing trees as purple vs green, inficated a bad camera. Strange there is no adjustment for that.

Thanks Chuck.