Raymarine forum / Raymarine Forums / Autopilots v / [CA] AP upgrade, what needs to be replaced?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] AP upgrade, what needs to be replaced?
08-09-17, 07:26 AM (This post was last modified: 08-14-17 09:07 AM by Chuck - Raymarine - Moderator.)
Post: #5
TributeJ42 Offline
Junior Member
**
 		Posts: 24
Joined: Mar 2016
Reputation: 0
RE: AP upgrade, what needs to be replaced?
Chuck, the ram is a hynautic K3 with a capacity of 29 Cu, In. The pump is a Robertson RPU 160. Flow Rate at 10 bar is 98 cu. in/min and the max pressure is 60. Boat displacement is 19700.

The boat actually has rack and pinion steering but the AP is all hydraulic.

So can the ACU control this equipment and what will I need to replace?

Thanks again.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: AP upgrade, what needs to be replaced? - TributeJ42 - 08-09-17 07:26 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication