The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product Selection Assistance v / ST60+ Compass - Recurring Display Problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST60+ Compass - Recurring Display Problem
08-13-17, 12:53 PM
Post: #1
DeltaBravo60604 Offline
Junior Member
**
 		Posts: 2
Joined: Jun 2016
Reputation: 0
ST60+ Compass - Recurring Display Problem
I have an ST60+ Compass in which there is a recurring problem -- displaying dashes, no course. Volt/Ohm test failed to identify problem and I wired new power because this was the last of four instruments in the daisy chain.
One thing I have not tried yet is to cut the full length transducer cable and crimp on new terminals. It's full length so has more resistance, and the excess is coiled, which might not be a good thing for compass data.
Any other ideas?
While looking for a replacement, it now appears that Raymarine no longer sells any displays for compass transducers. Is this correct?
Too bad, because a compass provides an indicator of leeway when heading is compared to GPS COG.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST60+ Compass - Recurring Display Problem - DeltaBravo60604 - 08-13-17 12:53 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication