Raymarine forum / Raymarine Forums / Autopilots v / Autopilot tacking

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Autopilot tacking
08-14-17, 10:48 AM
Post: #12
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Autopilot tacking
David,

Indeed you should perform the Pilot Factory Reset (MENU->SET-UP->AUTOPILOT CALIBRATION->COMMISSIONING->PILOT FACTORY RESET), not simply reset the autopilot control head's settings. Failure to then see the Detecting Magnetics indicator within the autopilot may then indicate a problem with the autopilot software update and it would accordingly be recommended that you provide an updated version of the MFD's Diagnostics...html file.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Autopilot tacking - daknecht - 07-06-17, 11:45 AM
RE: Autopilot tacking - daknecht - 07-10-17, 06:09 AM
RE: Autopilot tacking - daknecht - 07-17-17, 03:44 PM
RE: Autopilot tacking - daknecht - 07-28-17, 07:16 AM
RE: Autopilot tacking - daknecht - 08-04-17, 08:11 AM
RE: Autopilot tacking - daknecht - 08-13-17, 04:16 PM
RE: Autopilot tacking - Chuck - Raymarine - Moderator - 08-14-17 10:48 AM
RE: Autopilot tacking - daknecht - 08-14-17, 09:38 PM
RE: Autopilot tacking - daknecht - 08-17-17, 08:17 AM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication