Raymarine forum / Raymarine Forums / Autopilots v / Autopilot tacking

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Autopilot tacking
08-14-17, 09:38 PM (This post was last modified: 08-15-17 08:38 AM by Chuck - Raymarine - Moderator.)
Post: #13
daknecht Offline
Junior Member
**
 		Posts: 46
Joined: Mar 2016
Reputation: 0
RE: Autopilot tacking
I tried the reset again today. I then ran the Dockside Wizard and boat info, then went for a motor and then sail. Never saw "Detecting Magnetics" although I am unclear when and where I would see that. I checked the software version and it is 2.18. The autopilot worked fine for the afternoon. I tried to do the align to GPS routine and each time I got an error. Last, the magnetic compass and the GPS/autopilot are about 20° off.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Autopilot tacking - daknecht - 07-06-17, 11:45 AM
RE: Autopilot tacking - daknecht - 07-10-17, 06:09 AM
RE: Autopilot tacking - daknecht - 07-17-17, 03:44 PM
RE: Autopilot tacking - daknecht - 07-28-17, 07:16 AM
RE: Autopilot tacking - daknecht - 08-04-17, 08:11 AM
RE: Autopilot tacking - daknecht - 08-13-17, 04:16 PM
RE: Autopilot tacking - daknecht - 08-14-17 09:38 PM
RE: Autopilot tacking - daknecht - 08-17-17, 08:17 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication