European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
EV-100 and multiple data sources
|
|
08-22-17, 10:13 AM
(This post was last modified: 08-22-17 10:32 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
|
RE: EV-100 and multiple data sources
In my setup, the Nobeltec charting system is connected to the seatalkng backbone via the Actisence NGW-1-stng NMEA 183 to NMEA-2000 converter. I assume that only NMEA-2000 data is transmitted to the Backbone in this case. The Lowrance HDS is connected directly to the backbone via its MNEA-2000 port (using a devicenet type cable). Under this setup is it possible to have 183 data entering the backbone?
If I have to resort to a switch, where exactly would I place it. I would assume in either the black or red wire within the devicenet cable, is that correct? |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
EV-100 and multiple data sources - colbournee - 08-21-17, 06:03 PM
RE: EV-100 and multiple data sources - Chuck - Raymarine - Moderator - 08-22-17, 09:47 AM
RE: EV-100 and multiple data sources - colbournee - 08-22-17 10:13 AM
RE: EV-100 and multiple data sources - Chuck - Raymarine - Moderator - 08-22-17, 10:38 AM
|
User(s) browsing this thread: 1 Guest(s)