Crashing of Axioms

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Crashing of Axioms

08-22-17, 10:52 PM (This post was last modified: 08-23-17 08:58 AM by Chuck - Raymarine - Moderator.)

Post: #3

organum Offline

Junior Member

Posts: 9
Joined: Aug 2017
Reputation: 0

RE: Crashing of Axioms

Switching on via the unit's on/off switch. The power LED displays a dull red which tells me to toggle the supply breaker, then the LED is normal and the unit switches on.

AFAIK there are no other files and after the power reset the unit performs normally.

One thing I did think about is the power on sequence. On this occasion I had powered the slave on first. I will check on the boat today.

Thanks

BTW I tried to add a video from my iPad but the forum reports format not valid.

Thanks

« Next Oldest | Next Newest »

Messages In This Thread

Crashing of Axioms - organum - 08-21-17, 10:41 PM

RE: Crashing of Axioms - Chuck - Raymarine - Moderator - 08-22-17, 09:36 AM

RE: Crashing of Axioms - organum - 08-22-17 10:52 PM

RE: Crashing of Axioms - Chuck - Raymarine - Moderator - 08-23-17, 09:04 AM

RE: Crashing of Axioms - organum - 08-29-17, 04:16 AM

RE: Crashing of Axioms - Chuck - Raymarine - Moderator - 08-29-17, 01:14 PM

RE: Crashing of Axioms - organum - 08-31-17, 06:35 AM

RE: Crashing of Axioms - Chuck - Raymarine - Moderator - 08-31-17, 09:15 AM

User(s) browsing this thread: 5 Guest(s)