Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E80 radar overlay blanked in close range
08-24-17, 03:17 PM (This post was last modified: 08-24-17 04:09 PM by Chuck - Raymarine - Moderator.)
Post: #5
RE: E80 radar overlay blanked in close range
Chuck,
I was afraid you would ask for the SW version. I'll get it this weekend.
When the full page radar app is displayed no joy, change the range to over 2 miles and you will see the video show up.
The system is integrated with a ST 4000+ A/P using the fluxgate heading sensor. That is the only heading sensor (right now--- plan is to install a maretron in the near future). A Ray 120 GPS provides heading information that is displayed on the E80's data bar. As you can imagine, the own ship icon does not follow the GPS heading. I have not displayed the CDI screen but showing the heading info via the menu button and then punching down into shows blanks. When in the slip I can align the EBL. I thought the radar had broke and just happened to expand the chart view and noticed the video. Brought back memory of fiddling with the same problem years ago. Just completed a calibration swing on the fluxgate, it passed.

Phil
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: E80 radar overlay blanked in close range - Phil Niles - 08-24-17 03:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)