Raymarine forum / Raymarine Forums / Multifunction Displays v / MFD Compatibility with Robertson AP2500

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MFD Compatibility with Robertson AP2500
08-29-17, 03:57 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: MFD Compatibility with Robertson AP2500
Welcome to the Raymarine Forum briankidwell,

Should the autopilot feature a NMEA 0183 communications interface supporting NMEA 0183 v2.1 or higher (recommend reviewing the autopilot's installation guide or consulting with Simrad's support team), then the NMEA 0183 Port 1 OUT+ lead (yellow) of the MFD's Power/NMEA 0183/Video Input Cable would be interfaced to the autopilot's NMEA 0183 IN+ terminal. Additionally, the NMEA 0183 Port 1 OUT- lead (green) of the MFD's Power/NMEA 0183/Video Input Cable would be interfaced to the autopilot's NMEA 0183 IN- terminal.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: MFD Compatibility with Robertson AP2500 - Chuck - Raymarine - Moderator - 08-29-17 03:57 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication