Raymarine forum / Raymarine Forums / Autopilots v / Upgrade to ACU400

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrade to ACU400
09-07-17, 10:56 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Upgrade to ACU400
Welcome to the Raymarine Forum Bill,

As the C-Series Classic MFDs do not support SeaTalkng communications, the MFD would need to be interfaced to the SeaTalkng backbone via a SeaTalk to SeaTalkng Converter. All autopilot features specified within the MFD's Reference Manual will be supported by an Evolution autopilot. In addition to the ACU400 (which is compatible with a Type II Linear Drive), the currently installed fluxgate compass must be replace with an Evolution EV-1 CCU.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Upgrade to ACU400 - bfiegener - 09-03-17, 09:27 AM
RE: Upgrade to ACU400 - Chuck - Raymarine - Moderator - 09-07-17 10:56 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication