e95 NMEA 2000 engine alarms

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Dylancs,

Q1. Is there any way to enter alarm values for engine data through the e95?
A1. Negative. Raymarine MFDs are merely designed to simply repeat engine data, including supported alarms.

Q2. There seems to be a conflict somehow between the RS11 and the Raymarine devices. Unfortunately the Noland people didn't have an answer so I'm hoping someone else may.
A2. This is the first such report of any such problems. You may want to consider disconnecting the MFD from the SeaTalkng / NMEA 2000 until programming of the engine gateway has been completed.