The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Will a/c/e/eS/gS-Series MFDs bridge received NMEA 0183 AIS data to SeaTalkng?

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Will a/c/e/eS/gS-Series MFDs bridge received NMEA 0183 AIS data to SeaTalkng?
01-19-16, 03:33 PM (This post was last modified: 01-12-17 11:07 AM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Will a/c/e/eS/gS-Series MFDs bridge received NMEA 0183 AIS data to SeaTalkng?
Will a/c/e/eS/gS-Series MFDs bridge received NMEA 0183 AIS data to SeaTalkng?

With the exception of AIS data, other supported data items received via the MFD's NMEA 0183 port will bridged to SeaTalkng. This data will also be shared with other a/c/e/eS/gS-Series MFDs via the Ethernet network to which they have been interfaced. It is generally recommended that NMEA 0183 sources of AIS data be interfaced to a NMEA 0183 to SeaTalkng/NMEA 2000 data bridge (ex. Actisense NGW-1-AIS, etc.) rather than a MFD's NMEA 0183 port to permit not only the MFD(s) to have access to AIS data, but also to permit devices such as i70 MFIDs to have access to this data.

RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Will a/c/e/eS/gS-Series MFDs bridge received NMEA 0183 AIS data to SeaTalkng? - Chuck - Raymarine - Moderator - 01-19-16 03:33 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication