Raymarine forum / Raymarine Forums / Thermal Cameras v / cam220 orientation

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
cam220 orientation
09-19-17, 01:55 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: cam220 orientation
Welcome to the Raymarine Forum Jim,

The CAM220's / CAM210's / CAM200IP's advanced configuration settings may be accessed via the IP camera's web interface. In a nutshell, the CAM200 must be powered and interfaced to a PC's Ethernet communications interface and then the PC's web browser will be used to access the IP camera's web interface. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
cam220 orientation - jim_m5 - 09-19-17, 01:15 PM
RE: cam220 orientation - Chuck - Raymarine - Moderator - 09-19-17 01:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication