Raymarine forum / Raymarine Forums / Multifunction Displays v / raymarine networking options

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
raymarine networking options
09-19-17, 03:40 PM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: raymarine networking options
dmahler,

With respect to the MFD, nothing need be done to the MFD other than
- ensure that the MFD(s) have been updated with v19.03 software
- ensure that the Data Master MFD (as opposed to any non-Data Master MFDs in the system) has been interfaced as a spur to a powered and properly terminated SeaTalkng / NMEA 2000 backbone to which the Fusion components have also been interfaced as spurs.

No configuration settings should then be need on the MFD except if more than one Fusion source is present within the NMEA 2000 backbone. In the case of the latter, the operator would then need to run the Fusion app within the MFD's software and select which Fusion source the app will interface with.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
raymarine networking options - dmahler - 09-18-17, 04:53 PM
RE: raymarine networking options - Chuck - Raymarine - Moderator - 09-19-17 03:40 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication